Little Black Dress and Comfy Cardi

LBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comHello lovelies! Guess what? I’ve got a new favourite outfit (again).

I have to admit, not much planning went into this. The cardi was on the bottom of a to-do-list in the back of my head, for when I would run out of ideas (ha!) and the idea for the dress was born in the second I sawΒ that fabric. Buying the fabric, making a sketch and a pattern and sewing the dress all happened on a sunny Saturday afternoon. Although I have millions of projects on my to-sew list I always end up with these spontaneous projects! Most often these end up to be my favourite garments, though.
LBD and Cardi by thisblogisnotforyou.comTHE CARDIGAN

The Fabric:Β Those of you who have been following this blog for a while (and have an incredible memory) might recognise this fabric. It’s a really stretchy, loose wool knit. I got it from Minerva Crafts and initially wanted to use it for a Donna Karan Vogue Pattern, which never happened. Instead, I made this super cosy cowl dress. The Burda Cowl Neck dress pattern didn’t require as much fabric as the Vogue dress, so I had plenty left. I always had a cardigan in mind for it but couldn’t find a pattern I liked. As a knit fabric, it didn’t really fray much, but I overlocked all edges anyway.

LBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comI hemmed the sleeve by simply overlocking the raw edge, turning it in and top-stitching it in place with a narrow zig-zag stitch.Β All the other edges – bottom hem, neckline and front – are one continuous line I wanted to bias bind initially. Mid-way through the project I remembered that I had bought lots of stringed sequins a while ago. So instead of bias binding, I finished the edge with my overlocker, not turning it in. I sewed the sequins in place along the stitching of the overlocker.

I really like the finish as it adds to the lightness of the slightly sheer fabric. Also, no oneΒ minds some extra bling, right?
LBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comThe Pattern:Β The cardi pattern is completely self-drafted – with a cardigan in mind that my sister bought when she last visited me in London (I think she got it fromΒ Primark). I took some rough measurements in order to recreate it at some point. I found the sketch a little while ago and thought of it when I was looking for a quick and easy project last week. The drafting didn’t take too long. With the very loose fit I was going for the measurements didn’t Β have to be exact. The fabric was cut out quickly and the actual sewing did not take much longer. Applying the sequins probably took as long as the whole drafting and sewing process together. I didn’t mind – given that I have the time for it, I find hand-sewing so relaxing!

LBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comTHE DRESS

The Fabric:Β Now let’s talk about the dress! As far as I can remember, it’s the first LBD I made and it’s very likely that many others will follow! The day I spotted this fab jumbo ribbed jersey, I initially wanted to buy some zips from my local fabric store. I never really buy fabric there, it’s a really dodgy shop that mostly sells waxed table cloth stuff and trims. I spotted the fabric and a vision of this dress came to mind immediately. It was 60 inch wide and only Β£1.50/m. I bought 2m and started planning as soon as I came home.

The sleeves and waistband are from a recycled cardigan which I got from my mum-in-law. It’s quite a heavy knit. Looking at the label it must have been from some sort of boutique and appeared to be really good quality – even after all those times in the washing machine the fabric looks as good as new. The sleeves were big enough that I could squeeze both sleeves and waistband out of them. I kept the hem, which was really convenient and made the sewing process so much quicker!

LBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comThe Pattern:Β It’s a proper Franken-Dress – the pattern is part Lady Skater (Kitschy Coo), part Ultimate Pencil Skirt (Sew Over It) and part self-drafted.

I started of with the Lady Skater bodice, which is a TNT for me when it comes to dress patterns for knit fabrics. I lowered the neckline to a boat neck shape. These is no need for a shoulder seam on this one! Sewing front and back onto the sleeves was a bit tricky as the corners had to match up exactly at the shoulder mark on the sleeves, but it worked out fantastically.The sleeve pattern is from the Β Lady Skater, as well.LBD and Cardi by thisblogisnotforyou.comThe skirt pattern is based on my beloved Ultimate Pencil Skirt. I lowered the high waist down to my natural waist and then had to do a lot of thinking in order to get the waistband right. I shortened the bodice quite a bit and added a 5cm wide waistband between bodice and skirt. Instead of going with the darts from the original skirt pattern, I turned them into pleats to give the skirt a bit more volume. I know this is a bit risky, especially when you normally don’t want to attract too much attention to this area, but I put all my trust in the Elisalex once and it worked out fabulously, so I tried it again. I really like the shape and don’t think that it makes me look much bigger than I am!LBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comAll raw edges were finished using my overlocker. When using Jersey I sometimes sew all seams with the overlocker straight away because it is so much faster than my old little sewing machine. Because the dress’ fit is quite snug I thought some extra strong seams were quite a good idea and sewed all seams using a narrow zig-zag stitch before running the raw edges through the overlocker. Also, I needed to do quite a bit of matching with the sleeves and also with the pleats, which is so much easier on my regular machine.LBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.comThe facing is also cut out from the recycled cardi and interfaced with black iron-on interfacing.The facing is quite wide and attached to neckline and armhole seams, so the bodice is almost half-lined. It makes the facing lie really flat so that it’s practically invisible.

The skirt hem is turned under once and hand-stitched in place.

LBD and Cardi by thisblogisnotforyou.comLBD and Cardi by thisblogisnotforyou.com

I really really love both dress and cardi and love wearing both together. They’re both super comfy and warm which is the perfect combination right now! I have quite a bit of the jumbo ribbed jersey left and am planning a kimono sleeve cropped sweater – let’s see how that goes!


Happy sewing!
β™₯

facebook/bloglovin/pinterest
twitter/instagram

Stay in touch!

10 thoughts on “Little Black Dress and Comfy Cardi

  1. I love the combo….but most of all I simply love that dress “frankenstein” pattern is a fab term too. sew well done on this project !
    your photos are gorgeous too! say congrats from me to the photographer!
    bestest daisy j xx

    1. I’ve never seen jumbo ribbed jersey before and when I did I had to buy it. It’s the most comfy thing ever and much more stable than other Jersey fabric which makes it really easy to sew with!

  2. What a lovely combination, I understand why this is your favourite outfit. Love the sequins on the cardigan. The fabric of the dress is beautiful, black is my go to color for winter. The neckline of the dress is so nice, it looks so elegant.

  3. Gosh, i First thought you made new patterns πŸ™‚ both, dress and cardi look amazing. I love how neat the dress looks from the inside and I’m super jealous that you can draft your own pattern and whip up the garment in one afternoon.

    1. Haha, that would’ve been just a tad too much work! πŸ˜€ Getting everything done within one day doesn’t always work, though. Only sometimes, but then I’m pretty much manic πŸ˜€

Leave a Reply to thisblogisnotforyou Cancel reply

Your email address will not be published. Required fields are marked *