Refashion it! Golden Vintage Dress to Embellished Crop Top

vintage dress to crop top by thisblogisnotforyou.com

Hallöchen, ihr Lieben!

Hope you’re having a great week so far! I’m starting to get a bit stressed by the wedding preparations, especially with things involving the dress. A blog post was long overdue, though, so I’m trying to squeeze this one in between all the fittings and muslins and whatnot.

This is a really quick refashion project I wanted to share with you. It’s a loose-fitting embellished crop top I made from a dress that the Mr’s grandma gave me a little while ago. (scroll further down for before pics!).

vintage dress to crop top by thisblogisnotforyou.comIt was basically a rectangular, light-weight long dress that looked suspiciously handmade, but had some sort of label in it, so I’m not too sure about that fact. The dress itself had no shape whatsoever, the hem going way below knee-length. At first I thought it might be edgy and cool but when I put it on it simply looked horrible and I felt like wearing a potato sack.

As it so often happens, I forgot to take proper before pictures (which is really stupid when planning an before & after project, I know!), so this is all I have:vintage dress to crop top by thisblogisnotforyou.comThe dress was too narrow to give me enough fabric for cutting out a whole new garment, so I decided to take the easy way out and cut the bottom off. Chop, chop!
vintage dress to crop top by thisblogisnotforyou.comI overlocked the raw seam and hemmed it by hand using matching gold thread.vintage dress to crop top by thisblogisnotforyou.com

The fit was ok-ish, but the top still lacked something. Since it’s a really simple shape, I thought I might add some embellishments to add some bling and make it a bit less boring.

I played around with different embellishments I had at home, like studs and acrylic diamonds.
vintage dress to crop top by thisblogisnotforyou.comvintage dress to crop top by thisblogisnotforyou.comvintage dress to crop top by thisblogisnotforyou.com

I liked the studs best and started placing them on the neckline. Once I liked what I saw, I attached them using my pliers. I added more and more until I was happy with the end result.vintage dress to crop top by thisblogisnotforyou.comvintage dress to crop top by thisblogisnotforyou.comvintage dress to crop top by thisblogisnotforyou.comvintage dress to crop top by thisblogisnotforyou.comvintage dress to crop top by thisblogisnotforyou.comvintage dress to crop top by thisblogisnotforyou.com

Since the crop top is very wide, I love wearing it with my pencil skirts. Since they have a high waist, my belly won’t show which makes this look pretty work appropriate. Also, I can wear a tank top underneath during the cold season which is neat.

Personally, I love the tight skirt – loose top combination which is quite flattering as it makes your waist appear smaller than it is!

vintage dress to crop top by thisblogisnotforyou.comvintage dress to crop top by thisblogisnotforyou.com

It’s amazing how such small changes can make a big difference to a garment. Take an hour and an unloved garment and turn it into something you love wearing. Instant happiness!

I would love to hear about your experiences with transforming your old or vintage clothes!

xx

Charlie


Happy sewing!

facebook/bloglovin/pinterest
twitter/instagram

Stay in touch!

Get the look: Pleated Skirt with Suspenders and Vintage Trim Tutorial – no pattern needed!

pleated skirt with suspenders and vintage trim tutorial by thisblogisnotforyou.comAs promised, here’s the tutorial for the pleated skirt and suspenders I made on the weekend.

It’s a fairly easy sewing project and you won’t need any special skills to tackle it. The trickiest part is probably inserting the invisible zip, but this post also includes a tutorial on how to do it. So no worries, your skirt will turn out to be awesome! Let’s get cracking!

thisblogisnotforyou.com

You won’t need a pattern to make this skirt.

All you need:

– fabric (about 1m/40” wide and 1,5/60” long, depending on your waist measurements and the length of the skirt you prefer)

– invisible zip (ca. 25cm/10” long)

– trim (1,5-2m/60-80”)

– elastic band, 4 buttons

The trim I used is from the newest Cloth issue 18:

pleated skirt with suspenders and vintage trim tutorial by thisblogisnotforyou.comFor the skirt you need fabric that is about two times as wide as the width of your waistband.
So first you need to decide how high you want your skirt to sit. Mine is a bit lower than my waistline. Measure the circumference of the part of your body where you want the skirt’s waistband to sit (and don’t forget to add about 2cm/1” of seam allowance on each side before cutting out!)

Use this as reference for the following calculations (the picture below also makes it much clearer):

– The length of the skirt panels is three times as wide as half the length of your waistband. For instance, the length of my waistband (excl. seam allowance) is 75cm. So each skirt panel will be gathered into half the length of the waistband, so 37.5cm.
Since we are making ‘box pleats’ we need three times as much fabric, so 37.5 x 3 = 112.5

If your fabric is wide enough, simply cut it in half two get your front and back panel. The top seam allowance of the skirt panels equals the width of the waistband (mine is 4cm).

To make the waistband and suspenders we don’t need a lot of fabric.
My waistband is 4cm wide. Since you need to fold it over later on, the overall width is 8cm plus seam allowance.
I made the suspenders rather narrow and used strips of each 4cm width (1,5cm wide + 0.5 cm seam allowance, so they are in the end of the same width as the trim).

fabric cutting plan for pleated skirt by thisblogisnotforyou.com

When you’re done with all the calculations and cutting, start sewing together one of the skirt panel’s side seams (we have to first insert the zipper, before we can do the same with the second side seam).

When you don’t have a serger, but want to have neatly finished seams, what you can do is use a french seam.french seams tutorial for pleated skirt by thisblogisnotforyou.com

Place the skirt panels on top of each other, left sides together, to the right side are facing out. (If you’re a sewing novice: the right side will be the side of the fabric that will be on the outside later on).

Sew them together using a very narrow seam allowance (half of what you normally use). I used 5mm.

Then fold them over, so that the right side are together and the left side are facing out.  The raw edge is now between the two layers of fabric. Press the seam. Now sew another stitch to the left of the raw edge (which is now hidden between the two layers).

tutorial for pleated vintage skirt by thisblogisnotforyou.comNow you gather the skirt panel by neatly folding them into even box pleats.
You first have to determine the width of each pleat. I wanted to have 5 in the front and 5 in the back, so to match my waistband (2x 37.5cm) each pleat has to be 7.5cm wide.

The fabric that is folded back is twice as much, 15cm. Measure and the mark the folds of the pleat with pins.

Here’s how the box pleats are folded.
tutorial for pleated vintage skirt by thisblogisnotforyou.com

tutorial for pleated vintage skirt by thisblogisnotforyou.com

I used quite a lot of pins 🙂 But it’s important that the pleats stay in place to get a neat result in the end.

Now stitch the pleats in place. Normally, you really shouldn’t sew over pins, be careful not to damage your machine’s needle. If you don’t want to stitch over the pins, add a second row of pins to secure the pleats (you will need it anyway later on!).
tutorial for pleated vintage skirt by thisblogisnotforyou.comtutorial for pleated vintage skirt by thisblogisnotforyou.com

When you’ve stitched the first seam and added the second row of pins, you sew on the waistband.
The second row of pins is important to keep the pleats in place, since the seam of the waistband will be below the seam you just stitched. You could also just press the pleats in place, if you prefer doing that (my fabric was hard to press properly, so I just stuck with the pins).
tutorial for pleated vintage skirt by thisblogisnotforyou.com

Place the waistband on the gathered skirt panel, right sides together. The seam you stitch  has to be as far away from the raw edge as the waistband is wide (4cm in my case. I added 1cm of seam allowance, so the distance between the raw edges is 3cm).tutorial for pleated vintage skirt by thisblogisnotforyou.com

Fold open and press. Then place the trim in the middle and topstitch onto the waistband.
tutorial for pleated vintage skirt by thisblogisnotforyou.com

Now the invisible zip:invisible zipper tutorial for pleated skirt by thisblogisnotforyou.com

Make sure you close the zipper before pinning and stitching the other half. The seams of the waistband and the edges of the trim have to be in line with each other

When you’re done, fold and press the upper seam allowance of the waistband. Fold over and handstitch to the zipper and the back of the skirt.

invisible zipper tutorial for pleated skirt by thisblogisnotforyou.com

Also, sew the second side seam below the zipper.

Hem your skirt.tutorial for pleated vintage skirt by thisblogisnotforyou.com

Here you can also see the french seam. It’s quite a nice finish and the raw edge is neatly hidden.tutorial for pleated vintage skirt by thisblogisnotforyou.com

Now it’s time for the suspenders (or braces, for all the London gals 🙂 ).

Try on your skirt and measure the legth of the suspender straps by using your measuring tape. Mine are crossing at the back, keep that in mind while measuring. Add 4cm/2” of seam allowance on both ends.

Mine are 1.5cm wide (as the trim). Using 0.5cm seam allowance I cut out strips of 4cm width. Fold the strips in half, right sides together. Stitch.

Use a safety pin so turn the tubes you now have inside out. Press.

Add the trim and topstitch.

Sew the elastic band into four small loops (matching the size of your buttons).

Pull the end of the strap through the loop and fold over. Hide the ends of the elastic band in the fold and stitch together. Do that on all four ends.

tutorial for pleated vintage skirt by thisblogisnotforyou.comWith your skirt on, mark the position of the suspenders and sew on the buttons.tutorial for pleated vintage skirt by thisblogisnotforyou.com

Press your skirt’s hem. I pressed the pleats only half way down to add a little fullness to the skirt.

Et voilá! You’re done! pleated skirt with suspenders by thisblogisnotforyou5

I’d LOVE to see what your skirt looks like! Just send me a picture: hello(at)thisblogisnotforyou(dot)com or upload them on the facebook page!

If you have any questions regarding this tutorial, feel free to ask! x

PS: After writing this post, I noticed that this skirt looks a lot like the Chihiro skirt – so in case you’re into Super High School Level Cosplay and want to dress up as Chihiro Fujisaki feel free to make and wear this skirt! x